|
TD65 TRI-DECK
SPECIFICATIONS |
|
DESCRIPTION |
TD65-2 ( 12FT ) |
TD65 ( 15 1/2 FT ) |
|
Cutting Width |
12 Feet |
15 1/2 Feet |
|
Cutting Height |
1" to 5" - ⅜" Steps |
1" to 5" - ⅜" Steps |
Transport - Width
- Height
- Length |
7½ Feet
5½ Feet
14 Feet |
7½ Feet
5½ Feet
14 Feet |
|
Ground Clearance |
9¼" |
9¼" |
|
Weight |
2380 Lbs. |
2720 Lbs. |
Tongue Weight
- Transporting
- Mowing |
445 Lbs.
235 Lbs. |
580 Lbs.
330 Lbs. |
|
Ground Pressure |
7 Lbs. per Sq. Inch |
8 Lbs. per Sq. Inch |
|
Recommended HP |
25 Min - 40 Max. PTO |
30 Min - 50 Max. PTO |
Mowing Capacity
- 2 MPH
- 4 MPH
- 6 MPH |
Acres per Hour
2.9
5.8
8.7 |
Acres per Hour
3.75
7.5
11.3 |
|
360 Degree Turn |
24" Uncut Circle |
0" Uncut Circle |
|
Number of Spindles |
7 |
9 |
|
Blades |
23" Blades
3 per Center Deck
2 per Wing Deck |
23" Blades
3 per Deck |
High lift, heat treated, alloy steel blades
5/16" x 2½" x 23" - Optional: low lift blades available. |
|
Blade Support |
¾" x 2½" x 8" long
bar welded to spindle and machined for balance. ½" bolts hold blade rigid
to provide a clean, level cut. |
|
Spindles |
30mm diameter spindles are each carried in 2 greaseable ball bearings which
are housed in precision machined hub. |
|
Cutting Height |
Easy to use spacer bushing allow adjustment form 1" - 5" in
⅜"
increments. |
|
Number of Tires |
10 on decks, 2 on main frame, all turn on greaseable, tapered roller
bearings. |
|
Deck Tires |
15 x 6.00 x 6 NHS - heavy duty, 4 ply pneumatic tires. Replaceable castor
pivot bushings. |
|
Transport Tires |
18 x 9.50 x 8 NHS - 6 ply turf saver tires. |
|
Deck Construction |
3/16" steel plate formed and welded with supporting members at high stress
areas to achieve maximum structural strength. Deck is 5" deep, rear
discharge. |
|
Deck Flexibility |
40° Total (15°
Down/ 25° Up) 12° Front to Back |
|
Deck Drive |
PTO Shafts to right angle gear box driving 2 - "B" section belts to 3 heavy
duty spindles. |
|
Belt Adjustment |
Easily made by loosening four bolts at gear box base and adjusting the
slide plate forward or backward and retightening. |
|
Gear Boxes |
All gear boxes come with 1⅜" - 6 spline shafts. |
|
PTO Shafts |
Telescoping agricultural PTO shaft, with proper safety shields. 1⅜" - 6 spline quick-disconnect yokes on both ends with Ring Lock collars.
Input PTO - Category # 5
Deck PTO - Category # 2 |
|
Speeds |
Tractor PTO - 540 RPM
Blades - 3040 RPM
Blade Tip Speed - 18,827 F.P.M. |
|
Hydraulics |
Requires 1 double acting outlet, all hoses supplied to tractor. |
|
Hitch |
4 position, with height settings from 10½" to 15". Safety chain with
hook according to Dept. of Transport regulations. |
|
Paint Finish |
Electro-statically painted with oven baked finish. |
|
Safety Locks |
Decks automatically lock into transport position from the tractor seat.
System control valves regulate the lifting and lowering speed of the
decks. |
|
Top of Page |
