|
TD92 TRI-DECK
FEATURES
Daily maintenance and servicing can be easily performed in the field. The
PTO shafts have Ring Lock collars for easy removal and additional safety.
All blade spindle assemblies can be easily removed from the deck as a
complete unit. The blade spindles are greaseable from the top side of the
decks, through lubrication holes in the belt guards. Belt guards have wing
nut hold downs for fast removal without tools. All mower deck components
are totally interchangeable, for easy servicing. |
SOLID CONSTRUCTION = DEPENDABLE SERVICE
YEAR AFTER YEAR |
 |
Heavy Duty Blade Spindle assemblies are fabricated and machined to exact
tolerances. The spindles turn in greaseable ball bearings. Long support
bar holds blade straight to provide a clean, level cut. Steel shield below
bottom bearing gives protection from any debris that could otherwise
damage seal in bearing. A grease zerk on top of the spindle distributes
lubrication to both bearings. A nut and lock washer hold assembly
together. All spindle assemblies are interchangeable. Blades are attached
to the support bar with 2- 1/2" x 1-3/4" bolts. |
 |
Extra Plates Welded on spindle locations to give
additional support. Spindles are greaseable from top side without removing
the belt shields. Spindles can be removed form deck without disassembly.
|
 |
3/16" Steel Deck is formed and welded, with bracing at
high stress areas to provide maximum structural strength. Open back
discharge allows clippings to be dispersed without bunching up, leaving an
after cut appearance, second to none. |
 |
Heavy Duty Gear Box, with machined and case hardened gears, transmits
power to the mower decks. All PTO shafts have Ring Lock collars instead of
pins for additional safety. Oil level dip stick and drain plug allow for
easy maintenance. |
 |
Automatic Wing Lock system is deactivated from the tractor seat. System control
values regulate the lifting and lowering speed of the mower decks. All PTO
shafts run at the minimum angle for maximum life expectancy. |
 |
Easily Change Blades with all decks in raised position. Automatic safety
locks hold all decks in place with the hydraulics disconnected. Anti-scalp
rollers are attached on both wing decks. |
 |
Excellent Floatation is obtained with 12 large low pressure floatation
tires, all staggered, providing minimum soil penetration and compaction.
Cutting height adjustment can be simply done by removing lynch pin from
top of each castor stem and moving the spacers either above or below
support tube as required. Wheel hub and castor pivot are greaseable.
Replaceable castor pivot bushings. Six rigid, "In-Line" tires keep mower
in place while mowing along hillsides. |
 |
Narrow Transport width of 9-1/2 ft is achieved without disconnecting PTO
shafts. Radial automotive tires allow mower to be moved conveniently to
distant locations. |
|
Top of Page |
